SX Embedded Controller Instruction

JMP addr

Description:

Jump to (9 bit) address

Operation:

PC = ( page << 9 ) + addr

Flags affected:

none

Registers affected:

Sources referenced:

Cycles:

2 (compatible) or 3 (turbo)

Opcode:

Details:

SX Users Manual page # 88

Microchip PIC syntax:

GOTO addr

Notes:

JMP and SKIP instructions take 2 cycles in compatible mode, not 4 as stated in Table 3-7 in User's manual page 53.

file: /Techref/scenix/inst/jmp.htm, 1KB, , updated: 2005/12/6 16:09, local time: 2024/11/5 17:29,

^{3.137.223.255:LOG IN}

©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?

Please DO link to this page! Digg it! / MAKE!

<A HREF="http://linistepper.com/Techref/scenix/inst/jmp.htm"> SX Embedded Controller Instruction - JMP addr</A>