The MICR font is a specially shaped collection of numbers and symbols for which automated reading equipment was developed years ago in the banking industry. It is seen on the bottom of all U.S. and Canadian Checks, eCommerce Drafts, and deposit slip printing. It is commonly available for use with PCL and Postscript printers.
Years of experience have taught me that MICR problems are related to the paper or toner more often than to the printer. If the fuser is reaching a minimal temperature and the print is not fuzzy, the printer is doing its job. The problem is more likely with A) the toner falling off the paper in use (usually a paper issue) or B) insuffecient magnetic material in the toner (usually a toner issue). Actually, the problem is most often incorrect formatting or positioning of the MICR line.
See also:
All-Ink.com offers quality MICR toner cartridges for most printers:
Questions:
file: /Techref/printer/micr.htm, 6KB, , updated: 2020/12/2 09:54, local time: 2024/12/25 11:46,
18.218.231.116:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://linistepper.com/techref/printer/micr.htm"> Magnetic Ink Character Recognition</A> |
Did you find what you needed? |