please dont rip this site

Hewlett Packard LaserJet 4-series Printers

LaserJet 4-Series printers including 4, 4+, 4P, 4Si, and 4V (and corresponding M/MX versions) are supported .

The LaserJet 4L has neither an available SIMM slot nor a font cartridge slot and therefore cannot be supported at present. Support for this printer may be provided by our BOX device.

While flash SIMMs which can be programmed in the LaserJet 5 or 5M are now available, LaserJet 4-series SIMMs programmed in the LaserJet 4 series printers also can be installed in the 5 or 5M and the data on the SIMM can be used (read) to print while in the 5 or 5M. LaserJet 4-series SIMMs cannot be programmed in the 5 or 5M.

The current version of the firmware in the flash SIMM for all the 4-series printers is Version 2.09.

Installation

Number 358 07/22/96 "WM MEM CNFIG N/A" message after installing Flash SIMM in LJ 4+ or 4M+.

Number: 612 11/10/97 "INV PERS" or "INVALID PERSONALITY" when attempting to program forms to SIMM

See Also:

Questions:


file: /Techref/printer/lj4.htm, 1KB, , updated: 2008/7/29 07:49, local time: 2024/11/16 04:26,
TOP NEW HELP FIND: 
18.222.117.211:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://linistepper.com/techref/printer/lj4.htm"> Hewlett Packard LaserJet 4-series Printers</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?