PIC Microcontoller Radix Math Method Binary to ASCII, 16 bit to 5 digits

Binary to ASCII, 16 bit to 5 digits with leading zero suppression and fixed decimal point

from Dontronics and Scott Edwards

; BIN_ASC 16-bit value ; This routine converts a 16-bit number into a counted string of ; ASCII characters compatible with Serout. It suppresses ; leading zeros so that numbers like 17 are sent as "17" not "00017". buffer = 31 ; String buffer at end of memory. ASC_0 = '0' ; ASCII numbers: 30h thru 39h. ASC_dp = '.' ; ASCII char for decimal point (period). fix = 3 ; Position for fixed decimal point. org 8 dec_no Res 1 ; Decade (1,10,100...) to work on. tempH Res 1 ; 16-bit temporary variable used by tempL Res 1 ; the BIN_ASC routine. hiB Res 1 ; MSB of number to convert. lowB Res 1 ; LSB of number to convert. flags ds 1 zs = flags.0 ; Leading-zero suppression flag. P = pic16c55 ; device pic16c55,xt_osc,wdt_off,protect_off reset start org 0 ; Table consisting of values 10,000, 1000, 100, 10, and 1. decade ADDWF 02, _W RETLW 39 RETLW 16 RETLW 3 RETLW 232 RETLW 0 RETLW 100 RETLW 0 RETLW 10 RETLW 0 RETLW 1 start MOVLW $FF ; To see routines output, either MOVWF hiB MOVLW $FF ; use the PSIM PIC simulator, or MOVWF lowB CALL BIN_ASC ; merge with Serout. GOTO $ ; Endless loop ; This routine accepts a 16-bit number in hiB, lowB and converts it into ; a counted ASCII text string located at the address "buffer." The buffer ; grows downward in memory. The first (0th) item in buffer is the number ; of characters in the string. The routine destroys the contents of ; hiB, lowB. If this value is required elsewhere, make a copy. BIN_ASC CLRF buffer ; Clear char count (item 0 in buf). CLRF flags ; Clear zs flag. CLRF dec_no ; Clear decade no. MOVLW buffer-1 ; Reserve 0th byte of buffer for count. MOVWF fsr BIN_ASC_loop MOVF dec_no ,_w CALL decade ; from the lookup table. MOVWF tempH INCF dec_no ,F ; Get 2nd digit of decade no. MOVF dec_no ,_w CALL decade MOVWF tempL CALL d_point ; Insert decimal point. CALL sub_it ; Divide hiB,lowB by tempH,tempL MOVF indirect ,_w BTFSC flags, 0 ; If zs = 0 AND digit = 0 then GOTO BIN_ASC_no_zs BTFSC 3,2 ; digit is a leading zero to be GOTO BIN_ASC_no_zed BIN_ASC_no_zs MOVWF indirect ADD indirect,#ASC_0 ; an included zero (as in 7501) INCF buffer, F ; or a non-zero digit. DECF fsr, F ; Point to next memory location. BSF flags, 0 ; First non-zero digit sets zs bit. BIN_ASC_no_zed INCF dec_no,F ; Next decade. MOVLW 8 ; If dec_no = 8, we're down to ones. SUBWF dec_no ,_w BTFSS 3,2 GOTO BIN_ASC ; Otherwise, do next decade. INCF dec_no ,F ; Update decade number for d_point. CALL d_point ; Decimal point here? MOVF lowB ,_w MOVWF indirect ADD indirect,#ASC_0 ; Add offset for conversion to ASCII. INCF buffer, F ; Add 1 to character count. RETLW 0h ; This routine performs division by iterated subtraction. It is efficient ; in this application because the dividend and divisor keep getting smaller ; as BIN_ASC runs, so the quotient is never larger than nine. A general- ; purpose division routine would be slower (and longer). sub_it CLRF indirect ; Clear to track no. of subtractions. sub_it_loop MOVF tempL,_w ; Subtract LSB. SUBWF lowB, F BTFSC 3,0 ; If no borrow, continue w/MSB. GOTO sub_it_skip MOVLW 1 ; Otherwise borrow from MSB. SUBWF hiB, F BTFSC 3,0 ; If borrow causes a carry, then GOTO sub_it_skip INCF hiB, F ; add numbers back and return. MOVF tempL,_w ADDWF lowB, F RETLW 0h sub_it_skip MOVF tempH,_w ; Subtract MSB. SUBWF hiB, F BTFSC 3,0 ; If no borrow, subtract again. GOTO sub_it_skip2 ADD lowB,tempL ; Otherwise, undo the subtraction BTFSC 3,0 ; by adding entire 16-bit no. INCF hiB, F ; back together and return. ADD hiB,tempH RETLW 0 sub_it_skip2 INCF indirect, F ; No borrow, so do it again. GOTO sub_it_loop ; This routine adds a decimal point in the location set by "fix" in the ; equates at the beginning of the program. The location of the decimal point ; is in front of the "fix"ed digit, numbered starting with 0. If you fix the ; point at 0, the first (0th) character in the string produced by BIN_ASC ; will be a decimal point. If you don't want a decimal point, either move ; it out of range (fix = 6), or delete this routine and the "call d_point" ; in the body of BIN_ASC above. d_point MOVLW fix*2+1 SUBWF dec_no ,_w BTFSS 3,2 RETLW 0h BSF flags, 0 MOVLW ASC_dp MOVWF indirect INCF buffer, F DECF fsr, F RETLW 0h

Questions:

this seems a very useful piece of code, but i cant seem to get it working. I get an error that says "Overwriting previous address contents" (error 118) about 500 times. does this matter? if it does, then how do I need to modify the code? if not, then how do i make the error stop coming up?

Thanks heaps+

KILLspamsebastien49spam at spamhotmail.com asks:

dear,

I look for a converter code (binary to ASCII) and i think that the code of Dontronics and Scott Edwards is good for me.
But the instruction "ADD indirect,#ASC_0" & "ADD lowB,tempL" are used. I don't uderstand and i don't find this instruction in the data sheet of Microchip...
I use a PIC17C756, could you help me, please?

Sébastien Desmet

Comments:

There are several bugs/typos in this code. Here is the code I am using with a pic16f690 and the gpasm(Gnu/Linux) compiler. There are some changes in that I favour null terminated strings...

; This routine accepts a 16-bit number in hiB, lowB and converts it into
; a null terminated ASCII text string located at the address "buffer." 
; The routine destroys the contents of hiB, lowB. 
PRDEC:
        clrf    flags                   ; Clear zs flag.
        clrf    dec_no                  ; Clear decade no.
        movlw   buffer                  ; get buffer addr
        movwf   FSR                     ; set-up indirect adressing
prdeclp:
        movf    dec_no,w
        call    decade                  ; table lookup
        movwf   tempH                   ; save it
        incf    dec_no,f                ; Get 2nd digit of decade no.
        movf    dec_no,w                ; incremented decade counter
        call    decade                  ; table lookup
        movwf   tempL                   ; save it
;       call    d_point                 ; Insert decimal point.
        call    sub_it                  ; Divide hiB,lowB by tempH,tempL
        movf    INDF,w                  ; get the result
        btfsc   flags,0                 ; If zs = 0 AND digit = 0 then
        goto    prdecnzs
        btfsc   STATUS,2                ; digit is a leading zero to be
        goto    prdecnz
prdecnzs:       ;no leading 0 supression
        movwf   INDF
        movlw   a'0'
        addwf   INDF,f                  ; add ascii '0'
        incf    FSR,f                   ; Point to next memory location.
        bsf     flags,0                 ; First non-zero digit sets zs bit.
prdecnz:
        incf    dec_no,f                ; Next decade.
        movlw   0x08                    ; If dec_no = 8, we're down to ones.
        subwf   dec_no,w
        btfss   STATUS,2
        goto    prdeclp                 ; Otherwise, do next decade.
        incf    dec_no,f                ; Update decade number for d_point.
;       call    d_point                 ; Decimal point here?
        movf    lowB,w
        movwf   INDF
        movlw   a'0'
        addwf   INDF,f                  ; add ascii '0'
        incf    FSR,f
        movlw   0x00
        movwf   INDF                    ; null terminated
        call    PRLINE
        retlw   0x00


; This routine performs division by iterated subtraction. It is efficient
; in this application because the dividend and divisor keep getting smaller
; as BIN_ASC runs, so the quotient is never larger than nine. A general-
; purpose division routine would be slower (and longer).
sub_it:
        clrf    INDF                    ; Clear to track no. of subtractions.
sub_it_loop:
        movf    tempL,w                 ; Subtract LSB.
        subwf   lowB,f
        btfsc   STATUS,0                ; If no borrow, continue w/MSB.
        goto    sub_it_skip
        movlw   0x01                    ; Otherwise borrow from MSB.
        subwf   hiB,f
        btfsc   STATUS,0                ; If borrow causes a carry, then
        goto    sub_it_skip
        incf    hiB,f                   ; add numbers back and return.
        movf    tempL,w
        addwf   lowB,f
        retlw   0x00
sub_it_skip:
        movf    tempH,w                 ; Subtract MSB.
        subwf   hiB,f
        btfsc   STATUS,0                ; If no borrow, subtract again.
        goto    sub_it_skip2
        movf    tempL,w
        addwf   lowB,f                  ; Otherwise, undo the subtraction
        btfsc   STATUS,0                ; by adding entire 16-bit no.
        incf    hiB,f                   ; back together and return.
        movf    tempH,w
        addwf   hiB,f
        retlw   0x00
sub_it_skip2
        incf    INDF,f                  ; No borrow, so do it again.
        goto    sub_it_loop

; This routine adds a decimal point in the location set by "fix" in the
; equates at the beginning of the program. The location of the decimal point
; is in front of the "fix"ed digit, numbered starting with 0. If you fix the
; point at 0, the first (0th) character in the string produced by BIN_ASC
; will be a decimal point. If you don't want a decimal point, either move
; it out of range (fix = 6), or delete this routine and the "call d_point"
; in the body of BIN_ASC above.

d_point
        movlw   fix*2+1
        subwf   dec_no,w
        btfss   STATUS,2
        retlw   0x00
        bsf     flags,0
        movlw   a'.'
        movwf   INDF
        incf    FSR,f
        retlw   0x00


; Table consisting of values 10,000, 1000, 100, 10, and 1.
decade  addwf   PCL,f
        retlw   d'39'   ; 10,000
        retlw   d'16'
        retlw   d'3'    ; 1,000
        retlw   d'232'
        retlw   d'0'    ; 100
        retlw   d'100'
        retlw   d'0'    ; 10
        retlw   d'10'
        retlw   d'0'    ; 1
        retlw   d'1'

The ADD arg1, arg2 instruction seems to resolve as:
movfw arg2
addwf arg1, f
And, the table lookup, shouldn't it be:
decade ADDWF 02, F
Am I wrong???
+

file: /Techref/microchip/math/radix/b2a-16b5dlzd.htm, 12KB, , updated: 2009/11/23 15:43, local time: 2024/12/25 20:33, owner: JMN-EFP-786,

^{3.22.74.192:LOG IN}

©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?

Please DO link to this page! Digg it! / MAKE!

<A HREF="http://linistepper.com/techref/microchip/math/radix/b2a-16b5dlzd.htm"> PIC Microcontoller Radix Math Method Binary to ASCII, 16 bit to 5 digits </A>