Microchip IO Dev Lcd Lcdterminal.asm
title "LcdTerminal 16F873 or 16F628"
;
;
; Hardware Notes:
; 20 MHz osc 115200 baud
;
; Ted Rossin: 04-13-2003
; 06-05-2003
; ************************************************
; ** **
; ** Special characters: **
; ** 0x01 Home **
; ** 0x08 Back space **
; ** 0x09 Tab **
; ** 0x0a Line feed ^J **
; ** 0x0c Form feed (Clear display) **
; ** 0x0d Carriage return ^M **
; ** 0x10 Move to X,Y (X and Y are the **
; ** next two characters **
; ** 0x1b Escape **
; ** 0x00 Disable cursor **
; ** 0x01 Enable underscore cursor **
; ** 0x02 Enable block cursor **
; ** 0x03 Scroll display left **
; ** 0x04 Scroll display right **
; ** 0x05 Enable Display **
; ** 0x06 Disable Display **
; ** 0x07 Raw LCD controller command **
; ** 0x08 Disable vertical scroll **
; ** 0x09 Enable vertical scroll(default)**
; ** 0x10 Write Custom character 0 **
; ** Next 8 bytes form character **
; ** 0x11 Write Custom character 1 **
; ** Next 8 bytes form character **
; ** 0x12 Write Custom character 2 **
; ** Next 8 bytes form character **
; ** 0x13 Write Custom character 3 **
; ** Next 8 bytes form character **
; ** 0x14 Write Custom character 4 **
; ** Next 8 bytes form character **
; ** 0x15 Write Custom character 5 **
; ** Next 8 bytes form character **
; ** 0x16 Write Custom character 6 **
; ** Next 8 bytes form character **
; ** 0x17 Write Custom character 7 **
; ** Next 8 bytes form character **
; ** 0x80 Display custom character 0 **
; ** 0x81 Display custom character 1 **
; ** 0x82 Display custom character 2 **
; ** 0x83 Display custom character 3 **
; ** 0x84 Display custom character 4 **
; ** 0x85 Display custom character 5 **
; ** 0x86 Display custom character 6 **
; ** 0x87 Display custom character 7 **
; ** **
; ************************************************
LIST R=DEC
; Used for development
#ifdef __16F873
#include "p16f873.inc"
#define LCD_RS PORTC,2
#define LCD_E PORTC,3
#define BAUD_SELECT PORTC,4
__CONFIG _CP_OFF & _DEBUG_OFF & _HS_OSC & _PWRTE_ON & _WDT_OFF & _LVP_OFF & _WRT_ENABLE_ON & _BODEN_ON & _CPD_OFF
#endif
; Used for product
#ifdef __16F628
#include "P16f628.inc"
#define LCD_RS PORTA,2
#define LCD_E PORTA,3
#define BAUD_SELECT PORTA,5
#define _CPD_OFF 0x3fff ; Missing define
#define _CPD_ON 0x3eff ; Missing define
__CONFIG _HS_OSC & _CP_OFF & _CPD_OFF & _LVP_OFF & _BODEN_OFF & _MCLRE_OFF & _PWRTE_ON & _WDT_OFF
#endif
#define PRESCALE_TIMER_MODE 0xD0
#define PRESCALE_VALUE (PRESCALE_TIMER_MODE | 0x8) ; Set prescaler to 1/1
#define TERM_HOME 0x01 ; SOH
#define TERM_BS 0x08 ; BS
#define TERM_TAB 0x09 ; HTAB
#define TERM_LF 0x0a ; LF (Line feed) ^J
#define TERM_CLEAR 0x0c ; FF
#define TERM_CR 0x0d ; CR (Carriage return) ^M
#define TERM_POS 0x10 ; Move to X,Y
#define TERM_ESC 0x1b ; More fun ahead
#define ESC_DISABLE_CURSOR 0x00
#define ESC_ENABLE_UNDER_CURSOR 0x01
#define ESC_ENABLE_BLOCK_CURSOR 0x02
#define ESC_SCROLL_LEFT 0x03
#define ESC_SCROLL_RIGHT 0x04
#define ESC_ENABLE_DISPLAY 0x05
#define ESC_DISABLE_DISPLAY 0x06
#define ESC_RAW_COMMAND 0x07
#define ESC_DISABLE_VERT_SCROLL 0x08
#define ESC_ENABLE_VERT_SCROLL 0x09
#define ESC_WRITE_CUSTOM 0x10
#define DISPLAY_CUSTOM_MASK 0xf8
#define DISPLAY_CUSTOM_VALUE 0x80
#define STATE_NORMAL 0
#define STATE_WAIT_X 1
#define STATE_WAIT_Y 2
#define STATE_WAIT_COMMAND 3
#define FLAGS_DISABLE_VERT_SCROLL 0
; RAM
#define FIFO_START 0xA0
#define FIFO_END 0xEF
#define REG_START 0x020
cblock REG_START
_w, _status, _fsr ; Context Register Save Values
Amount
DelayL,DelayH
LcdX,LcdY
Tmp,Tmp2
Loop1
Count
State
Flags
LastRS232Byte
CgRamAddr
Param:2 ; Parameters
; Input FIFO
Empty
FifoWritePtr
FifoReadPtr
; Scroll buffer
ScrollBuffer1:20
ScrollBuffer2:20
ScrollBuffer3:20
endc
org 0
Startup:
nop
nop
nop
goto Main
; ************************************************
; ** **
; ** Interrupt handler **
; ** **
; ************************************************
org 4
Int:
movwf _w ; Save Context Registers
movf STATUS, w ; - Assume TMR0 is the only enabled Interrupt
movwf _status
movf FSR,w
movwf _fsr
bcf PIR1,RCIF ; Clear the recieved data flag
; Write byte to FIFO to full check
movf FifoWritePtr,w
movwf FSR
movf RCREG,w
movwf INDF
bcf Empty,0 ; Clear the empty flag
incf FifoWritePtr,f
movf FifoWritePtr,w
sublw FIFO_END
btfss STATUS,Z ; Skip if need to wrap write pointer
goto IntEnd
movlw FIFO_START
movwf FifoWritePtr
IntEnd:
movf _fsr,w ; Restore registers
movwf FSR
movf _status, w
movwf STATUS
swapf _w, f
swapf _w, w
retfie
; ************************************************************************
; ** **
; ** GetRS232Byte: Waits for a byte to be received and then returns it **
; ** in w. **
; ** **
; ************************************************************************
GetRS232Byte:
btfsc Empty,0 ; Wait for byte to show up.
goto $-1
movf FifoReadPtr,w ; Fetch byte from FIFO
movwf FSR
movf INDF,w
movwf Tmp
incf FifoReadPtr,f
movf FifoReadPtr,w
sublw FIFO_END
btfss STATUS,Z ; Skip if need to wrap write pointer
goto GetRS232ByteEnd
movlw FIFO_START
movwf FifoReadPtr
GetRS232ByteEnd
movf FifoReadPtr,w
subwf FifoWritePtr,w
btfss STATUS,Z
goto GetRS232ByteSkip
bsf Empty,0 ; Set the empty flag
GetRS232ByteSkip
movf Tmp,w
return
; ************************************************************************
; ** **
; ** SendRS232Byte: Waits for transmit to be ready and then sends byte **
; ** in w to the RS-232 port **
; ** **
; ************************************************************************
SendRS232Byte:
btfss PIR1,TXIF
goto $-1
movwf TXREG
return;
; ************************************************************************
; ** **
; ** InitRS232: **
; ** Initialize the RS-232 port for recieve interrupt operation. **
; ** **
; ************************************************************************
InitRS232:
bcf STATUS,RP0
bcf STATUS,RP1 ; Select Bank 0
bsf STATUS,RP0 ; Select Bank 1 registers
#ifdef __16F873
bsf TRISC^0x80,7 ; PORTC[RX] is Input
bcf TRISC^0x80,6 ; PORTC[TX] is Output
#else
bsf TRISB^0x80,1 ; PORTB[RX] is Input
bcf TRISB^0x80,2 ; PORTB{TX] is Output
#endif
bcf STATUS,RP0 ; Select Bank 0
movlw 129 ; Set baud to 9600
btfss BAUD_SELECT ; Check to see if High baud rate
movlw 10 ; Set baud to 115200
bsf STATUS,RP0 ; Select Bank 1 registers
; movlw 20 ; Set baud to 57600
movwf SPBRG^0x80 ;
movlw (1<<TXEN)|(1<<BRGH)
movwf TXSTA^0x80 ; Set transmit mode
movlw (1<<RCIE)
iorwf PIE1^0x80,f ; Enable receive interrupts
bcf STATUS,RP0 ; Select Bank 0
movlw (1<<SPEN)|(1<<CREN)
movwf RCSTA ; Set receive mode
bsf Empty,0 ; Set the empty flag
movlw FIFO_START
movwf FifoWritePtr
movwf FifoReadPtr
return
;
; InitWaitTimer
;
InitWaitTimer:
bcf STATUS,RP0
bcf STATUS,RP1
movlw 0x01 ; timer 1 internal 1:1 prescale
movwf T1CON
clrf TMR1L
clrf TMR1H
return
;
; Waitms
;
Waitms:
WaitmsLoop:
bcf T1CON,0 ; Disable Timer
movlw 255-19
movwf TMR1H
movlw 255-(136-12)
movwf TMR1L
bsf T1CON,0 ; Enable Timer
WaitmsInnerLoop:
btfsc TMR1H,7
goto WaitmsInnerLoop
decfsz Amount,f
goto WaitmsLoop
return;
;
; Waitus
;
Waitus:
bcf T1CON,0 ; Turn off timer
movlw 5
subwf Amount,w
movwf DelayL
bcf STATUS,C
clrf DelayH
rlf DelayL,f
rlf DelayH,f
rlf DelayL,f
rlf DelayH,f
movlw 5
subwf Amount,w
addwf DelayL,f
btfsc STATUS,C
incf DelayH,f
; {DelayH,DelayL} = Amount*5
movf DelayL,w
sublw 255 ; 255-DelayL
movwf TMR1L
movf DelayH,w
sublw 255
movwf TMR1H
bsf T1CON,0 ; Turn on Timer
movlw 5-1
subwf Amount,w
btfss STATUS,C
return; ; return if Amount < 5us
WaitusLoop:
btfsc TMR1H,7
goto WaitusLoop
return
;
WriteData:
#ifdef __16F873
movwf PORTB
#else
; Swizzle byte data between PORT A and B
; {PB7,PB6,PB5,PB4,PB3,PB0,PA1,PA0} = w[7:0]
movwf Tmp
andlw 0xfc
movwf PORTB
btfsc Tmp,2
bsf PORTB,0
movf Tmp,w
andlw 0x03
movwf Param
movf PORTA,w
andlw 0xfc
iorwf Param,w
movwf PORTA
#endif
return
;
; Writes the character in W to LCD display
;
LcdPutChar:
movwf Tmp
call WriteData
bsf LCD_RS
bsf LCD_E
nop
bcf LCD_E
; Save data in Scroll Buffer
movf LcdY,w
addlw 0-0 ; Check for 0
btfsc STATUS,Z
goto LcdPutCharFinish
movf LcdY,w
addlw 256-1 ; Check for 1
btfsc STATUS,Z
goto LcdPutCharLine1
movf LcdY,w
addlw 256-2 ; Check for 2
btfsc STATUS,Z
goto LcdPutCharLine2
goto LcdPutCharLine3
LcdPutCharLine1:
movlw ScrollBuffer1
goto LcdPutCharSave
LcdPutCharLine2:
movlw ScrollBuffer2
goto LcdPutCharSave
LcdPutCharLine3
movlw ScrollBuffer3
LcdPutCharSave:
movwf FSR
movf LcdX,w
addwf FSR,f
movf Tmp,w
movwf INDF ; Write data into buffer
LcdPutCharFinish:
incf LcdX,f
movlw 40
movwf Amount
call Waitus
return
;
; LcdWriteCommand: Writes the command in w to the LCD disply
;
LcdWriteCommand:
movwf Tmp
call WriteData
bcf LCD_RS
bsf LCD_E
nop
bcf LCD_E
movlw 40
movwf Amount
call Waitus
return
;
; LcdClearDisplay: Clears LCD display
;
LcdClearDisplay:
movlw 0x01 ; Clear display
call WriteData
bcf LCD_RS
bsf LCD_E
nop
bcf LCD_E
clrf LcdX
clrf LcdY
movlw 2
movwf Amount
call Waitms
return
;
; InitLcd: Initializes LCD display
;
LcdInit:
bcf LCD_RS ; Turn off stobes to LCD display
bcf LCD_E
; Clear scroll buffers
clrf Count
movlw 20
movwf Loop1
LcdInitLoop:
movlw ScrollBuffer1
movwf FSR
movf Count,w
addwf FSR,f
movlw ' ' ; Replace with blank
movwf INDF
movlw ScrollBuffer2
movwf FSR
movf Count,w
addwf FSR,f
movlw ' ' ; Replace with blank
movwf INDF
movlw ScrollBuffer3
movwf FSR
movf Count,w
addwf FSR,f
movlw ' ' ; Replace with blank
movwf INDF
incf Count,f
decfsz Loop1,f
goto LcdInitLoop
movlw 100
movwf Amount
call Waitms ; Wait for LCD to power up
call LcdClearDisplay
movlw 0x38 ; Set Function
call LcdWriteCommand
movlw 0x0c ; Turn on display (no cursor)
call LcdWriteCommand
movlw 0x06 ; Set Entry Mode
call LcdWriteCommand
return
;
; LcdSetPos
;
LcdSetPos:
movlw 0x80 ; Lcd Set Addr Command
addwf LcdX,w ; Add X offset
btfsc LcdY,0
addlw 0x40 ; Odd line Y offset
btfsc LcdY,1
addlw 0x14 ; Lines 2 and 3 offset
movwf Tmp
call WriteData
bcf LCD_RS
bsf LCD_E
nop
bcf LCD_E
movlw 40
movwf Amount
call Waitus
return
#ifdef FLASH_MEMORY_ACCESS
;
; LcdDisplayString(Param+1,Param+0) {Param+1,param+0} form 16-bit address pointer
; The string must be located in flash memory code space
;
LcdDisplayString:
movf Param+1,w ; Fetch low address (assume bank 0)
bsf STATUS,RP1
bcf STATUS,RP0 ; Bank2
movwf EEADR^0x100 ; Set low address
bcf STATUS,RP1 ; Bank 0
movf Param+0,w
bsf STATUS,RP1 ; Bank 2
movwf EEADRH^0x100 ; Set high address
LcdDisplayStringLoop:
bsf STATUS,RP0 ; Bank3
bsf EECON1^0x180,EEPGD ; Point to Program memory
bsf EECON1^0x180,RD ; Start read operation
nop ; two required NOPs
nop
bcf STATUS,RP0 ; Bank2
movf EEDATA^0x100,w ; Fetch Low Byte
bcf STATUS,RP1 ; Bank0
addlw 0 ; Check for end of string
btfsc STATUS,Z
return ; End of string
addlw 256-'\n' ; Check for \n
btfsc STATUS,Z
goto LcdDisplayStringNewLine
addlw '\n' ; Restore check value
call LcdPutChar
LcdDisplayStringAdvance:
bsf STATUS,RP1 ; Bank 2
incf EEADR^0x100,f ; Advance read pointer
btfsc STATUS,Z
incf EEADRH^0x100,f ; Advance high order address if overflow
goto LcdDisplayStringLoop
LcdDisplayStringNewLine:
clrf LcdX
incf LcdY,f
call LcdSetPos ; Goto (LcdX,LcdY)
goto LcdDisplayStringAdvance
#endif
;
; Main Program
;
Main:
bcf STATUS,RP0
bcf STATUS,RP1
call InitWaitTimer
bcf STATUS,RP1
bsf STATUS,RP0 ; Select Bank 1
#ifdef __16F873
movlw 0x2f ; Port A[3:0],A[5] are input for A/D
movwf TRISA^0x80
clrf TRISB^0x80 ; PORTB is Output
movlw 0x10 ; Output PORTC[7:5],PORTC[3:0], Input PORTC[4]
movwf TRISC^0x80
movlw 0x00 ; (left justified data) 8 or 5 A/D channels
movwf ADCON1^0x80
bcf STATUS,RP0 ; Go back to Bank 0
movlw 0x81 ; FOSC/32, channel=0, ADON=1
movwf ADCON0
#else
bcf STATUS,RP0 ; Select Bank 0
movlw 0x07
movwf CMCON ; Turn off 16F82x comparators to save power
bsf STATUS,RP0 ; Select Bank 1
movlw 0x20 ; Port A[4] is input, Port A[3:0] are output
movwf TRISA^0x80 ; PORTA is Output
clrf TRISB^0x80 ; PORTB is Output
#endif
bsf STATUS,RP0 ; Go to Bank 1
movlw PRESCALE_VALUE ; Set Timer 0 prescale value
movwf OPTION_REG^0x080
bcf STATUS,RP0 ; Go back to Bank 0
call LcdInit
call LcdClearDisplay
call InitRS232
; Initialize varibles
clrf LcdX
clrf LcdY
clrf LastRS232Byte
clrf Flags
movlw STATE_NORMAL
movwf State
movlw (1<<GIE) | (1<<PEIE)
movwf INTCON ; Enable Interrupts
TheLoop:
movf State,w
addlw STATE_NORMAL ; Check
btfsc STATUS,Z
goto NormalState
addlw STATE_NORMAL ; Restore check value
addlw 256-STATE_WAIT_X ; Check
btfsc STATUS,Z
goto WaitXState
addlw STATE_WAIT_X ; Restore check value
addlw 256-STATE_WAIT_Y ; Check
btfsc STATUS,Z
goto WaitYState
addlw STATE_WAIT_Y ; Restore check value
addlw 256-STATE_WAIT_COMMAND ; Check
btfsc STATUS,Z
goto EscCommand
addlw STATE_WAIT_COMMAND ; Restore check value
goto TheLoop
WaitXState:
call GetRS232Byte
movwf LcdX
movlw STATE_WAIT_Y
movwf State
goto TheLoop
WaitYState:
call GetRS232Byte
movwf LcdY
movlw STATE_NORMAL
movwf State
call LcdSetPos ; Goto (LcdX,LcdY)
goto TheLoop
;
; Process Esc command
;
EscCommand:
movlw STATE_NORMAL
movwf State
call GetRS232Byte
addlw ESC_DISABLE_CURSOR ; Check
btfsc STATUS,Z
goto DisableCursor
addlw ESC_DISABLE_CURSOR ; Restore check value
addlw 256-ESC_ENABLE_UNDER_CURSOR ; Check
btfsc STATUS,Z
goto EnableUnderCursor
addlw ESC_ENABLE_UNDER_CURSOR ; Restore check value
addlw 256-ESC_ENABLE_BLOCK_CURSOR ; Check
btfsc STATUS,Z
goto EnableBlockCursor
addlw ESC_ENABLE_BLOCK_CURSOR ; Restore check value
addlw 256-ESC_SCROLL_LEFT ; Check
btfsc STATUS,Z
goto ScrollLeft
addlw ESC_SCROLL_LEFT ; Restore check value
addlw 256-ESC_SCROLL_RIGHT ; Check
btfsc STATUS,Z
goto ScrollRight
addlw ESC_SCROLL_RIGHT ; Restore check value
addlw 256-ESC_ENABLE_DISPLAY ; Check
btfsc STATUS,Z
goto EnableDisplay
addlw ESC_ENABLE_DISPLAY ; Restore check value
addlw 256-ESC_DISABLE_DISPLAY ; Check
btfsc STATUS,Z
goto DisableDisplay
addlw ESC_DISABLE_DISPLAY ; Restore check value
addlw 256-ESC_RAW_COMMAND ; Check
btfsc STATUS,Z
goto RawCommand
addlw ESC_RAW_COMMAND ; Restore check value
addlw 256-ESC_DISABLE_VERT_SCROLL ; Check
btfsc STATUS,Z
goto DisableVertScroll
addlw ESC_DISABLE_VERT_SCROLL ; Restore check value
addlw 256-ESC_ENABLE_VERT_SCROLL ; Check
btfsc STATUS,Z
goto EnableVertScroll
addlw ESC_ENABLE_VERT_SCROLL ; Restore check value
movwf LastRS232Byte
andlw DISPLAY_CUSTOM_MASK
addlw 256-ESC_WRITE_CUSTOM ; Check
btfsc STATUS,Z
goto WriteCustomChar
movf LastRS232Byte,w
goto TheLoop
DisableCursor:
movlw 0x0c
call LcdWriteCommand
goto TheLoop
EnableUnderCursor:
movlw 0x0e
call LcdWriteCommand
goto TheLoop
EnableBlockCursor:
movlw 0x0f
call LcdWriteCommand
goto TheLoop
ScrollLeft:
movlw 0x18
call LcdWriteCommand
goto TheLoop
ScrollRight:
movlw 0x1c
call LcdWriteCommand
goto TheLoop
EnableDisplay:
movlw 0x0c
call LcdWriteCommand
goto TheLoop
DisableDisplay:
movlw 0x08
call LcdWriteCommand
goto TheLoop
RawCommand:
movf LastRS232Byte,w
call LcdWriteCommand
goto TheLoop
DisableVertScroll:
bsf Flags,FLAGS_DISABLE_VERT_SCROLL
goto TheLoop
EnableVertScroll:
bcf Flags,FLAGS_DISABLE_VERT_SCROLL
goto TheLoop
WriteCustomChar:
movf LastRS232Byte,w
andlw 0x7 ; Just get character ID
movwf CgRamAddr
bcf STATUS,C
rlf CgRamAddr,f
rlf CgRamAddr,f
rlf CgRamAddr,f ; Set character Ram address
movlw 8
movwf Count
WriteCustomCharLoop:
movf CgRamAddr,w
iorlw 0x40
call LcdWriteCommand
call GetRS232Byte
call LcdPutChar ; Write the data
decf LcdX,f ; undo inc of LcdX
incf CgRamAddr,f
decfsz Count,f
goto WriteCustomCharLoop
; Go back to normal character mode
call LcdSetPos ; Goto (LcdX,LcdY)
goto TheLoop
;
; Normal single character
;
NormalState:
call GetRS232Byte
; Lame case statement
addlw 256-TERM_LF ; Check for \n
btfsc STATUS,Z
goto PreTerminalNewLine1
addlw TERM_LF ; Restore check value
addlw 256-TERM_CR ; Check for \r
btfsc STATUS,Z
goto PreTerminalNewLine2
addlw TERM_CR ; Restore check value
movwf LastRS232Byte
addlw 256-TERM_BS ; Check for BS
btfsc STATUS,Z
goto TerminalBackSpace
addlw TERM_BS ; Restore check value
addlw 256-TERM_HOME ; Check
btfsc STATUS,Z
goto TerminalHome
addlw TERM_HOME ; Restore check value
addlw 256-TERM_CLEAR ; Check
btfsc STATUS,Z
goto TerminalClear
addlw TERM_CLEAR ; Restore check value
addlw 256-TERM_TAB ; Check
btfsc STATUS,Z
goto TerminalTab
addlw TERM_TAB ; Restore check value
addlw 256-TERM_POS ; Check
btfsc STATUS,Z
goto TerminalPos
addlw TERM_POS ; Restore check value
addlw 256-TERM_ESC ; Check
btfsc STATUS,Z
goto TerminalEscape
addlw TERM_ESC ; Restore check value
movf LcdX,w
addlw 256-20
btfsc STATUS,Z
call TerminalNewLine
movf LastRS232Byte,w
andlw DISPLAY_CUSTOM_MASK
addlw 256-DISPLAY_CUSTOM_VALUE ; Check
btfsc STATUS,Z
goto DisplayCustomChar
movf LastRS232Byte,w
call LcdPutChar
goto TheLoop
PreTerminalNewLine1: ; \n received
movf LastRS232Byte,w
addlw 256-TERM_CR ; Check for previous \r
btfsc STATUS,Z
goto TheLoop
movlw TERM_LF
movwf LastRS232Byte
PreTerminalNewLine:
call TerminalNewLine
goto TheLoop
PreTerminalNewLine2: ; \r received
movf LastRS232Byte,w
addlw 256-TERM_LF ; Check for previous \n
btfsc STATUS,Z
goto TheLoop
movlw TERM_CR
movwf LastRS232Byte
call TerminalNewLine
goto TheLoop
TerminalNewLine:
clrf LcdX
incf LcdY,f
movf LcdY,w
addlw 256-4 ; Check for need to scroll
btfsc STATUS,Z
call ScrollDisplay
call LcdSetPos ; Goto (LcdX,LcdY)
return
TerminalBackSpace:
movf LcdX,w
addlw 0 ;Check for zero
btfsc STATUS,Z
goto TheLoop
decf LcdX,f
call LcdSetPos ; Goto (LcdX,LcdY)
movlw ' '
call LcdPutChar ; Remove character
decf LcdX,f
call LcdSetPos ; Goto (LcdX,LcdY)
goto TheLoop
TerminalHome:
clrf LcdX
clrf LcdY
call LcdSetPos ; Goto (LcdX,LcdY)
goto TheLoop
TerminalClear:
call LcdClearDisplay
goto TheLoop
TerminalTab:
movf LcdX,w
addlw 4
andlw 0xfc ; Snap to tab stop
movwf LcdX ; Save new value
addlw 256-20
btfsc STATUS,Z
goto PreTerminalNewLine
call LcdSetPos
goto TheLoop
TerminalPos:
movlw STATE_WAIT_X
movwf State
goto TheLoop
TerminalEscape:
movlw STATE_WAIT_COMMAND
movwf State
goto TheLoop
DisplayCustomChar:
movlw DISPLAY_CUSTOM_VALUE
subwf LastRS232Byte,w ; w = LastRS232Byte - DISPLAY_CUSTOM_MASK
call LcdPutChar
goto TheLoop
;*************************************************
;** **
;** ScrollDisplay: **
;** **
;*************************************************
ScrollDisplay:
btfsc Flags,FLAGS_DISABLE_VERT_SCROLL
goto DoNotScrollDisplay
call LcdClearDisplay
clrf Count
movlw 20
movwf Loop1
ScrollDisplayLoop1:
movlw ScrollBuffer1
movwf FSR
movf Count,w
addwf FSR,f
movf INDF,w
call LcdPutChar
incf Count,f
decfsz Loop1,f
goto ScrollDisplayLoop1
clrf LcdX
incf LcdY,f
call LcdSetPos ; Goto (LcdX,LcdY)
clrf Count
movlw 20
movwf Loop1
ScrollDisplayLoop2:
movlw ScrollBuffer2
movwf FSR
movf Count,w
addwf FSR,f
movf INDF,w
call LcdPutChar
incf Count,f
decfsz Loop1,f
goto ScrollDisplayLoop2
; Copy line 3 to line 2 and clear line 3 buffer
clrf LcdX
incf LcdY,f
call LcdSetPos ; Goto (LcdX,LcdY)
clrf Count
movlw 20
movwf Loop1
ScrollDisplayLoop3:
movlw ScrollBuffer3
movwf FSR
movf Count,w
addwf FSR,f
movf INDF,w
movwf Tmp
movlw ' ' ; Replace with blank
movwf INDF
movf Tmp,w
call LcdPutChar
incf Count,f
decfsz Loop1,f
goto ScrollDisplayLoop3
DoNotScrollDisplay:
clrf LcdX
movlw 3
movwf LcdY
return;
end
| file: /Techref/microchip/io/dev/lcd/LcdTerminal.asm, 24KB, , updated: 2003/9/10 11:39, local time: 2025/2/5 02:50,
|
| | ©2025 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
<A HREF="http://linistepper.com/techref/microchip/io/dev/lcd/LcdTerminal.asm"> microchip io dev lcd LcdTerminal</A> |
| Did you find what you needed?
|