//////////////////////////////////////////////////////////
// bmpio.cpp
//////////////////////////////////////////////////////////
#include <fstream.h>
#include "bmpio.h"
#include "rasterop.h"
static unsigned char bmpHeader[62] =
{ 'B', 'M', 0x6E, 0x1B, 0x0F, 0x00, 0x00, 0x00,
0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x28, 0x00,
0x00, 0x00, 0x60, 0x09, 0x00, 0x00, 0xE4, 0x0C,
0x00, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0xFF, 0xFF, 0xFF, 0x00
};
int bmp_save( char *filename, BMPINFO *pbmpinfo )
{
int starty = 0;
int endy = pbmpinfo->height - 1;
int bpl = (pbmpinfo->width + 7) / 8;
if( pbmpinfo->cropy )
{
unsigned char *p = pbmpinfo->bits;
int i = 0;
while( !*p && starty <= endy )
{
i++;
if( i >= bpl )
{
starty++;
i = 0;
}
p++;
}
p = pbmpinfo->bits + bpl * pbmpinfo->height;
i = bpl;
while( !*--p && starty <= endy )
{
if( --i <= 0 )
{
endy--;
i = bpl;
}
}
}
ofstream ofBmp;
ofBmp.open( filename, ios::out | ios::binary );
if( starty <= endy )
{
unsigned long w = pbmpinfo->width;
unsigned long h = endy - starty + 1;
if( pbmpinfo->scalex > 1 || pbmpinfo->scaley > 1 )
{
if( starty + h < pbmpinfo->height && h % pbmpinfo->scaley )
h ++;
bit_res( pbmpinfo->bits + bpl * starty, w, h,
(w + pbmpinfo->scalex - 1) / pbmpinfo->scalex,
(h + pbmpinfo->scaley - 1) / pbmpinfo->scaley );
w = (w + pbmpinfo->scalex - 1) / pbmpinfo->scalex;
h = (h + pbmpinfo->scaley - 1) / pbmpinfo->scaley;
}
ofBmp.write( bmpHeader, 18 );
ofBmp.put( char( w & 0x000000FF) );
ofBmp.put( char((w>> 8) & 0x000000FF) );
ofBmp.put( char((w>>16) & 0x000000FF) );
ofBmp.put( char((w>>24) & 0x000000FF) );
ofBmp.put( char( h & 0x000000FF) );
ofBmp.put( char((h>> 8) & 0x000000FF) );
ofBmp.put( char((h>>16) & 0x000000FF) );
ofBmp.put( char((h>>24) & 0x000000FF) );
ofBmp.write( bmpHeader + 26, sizeof(bmpHeader) - 26 );
bit_neg( pbmpinfo->bits + bpl * starty, bpl * h );
unsigned char *p = pbmpinfo->bits + bpl * (starty + h);
int bpl2 = (w + 7) / 8;
for( unsigned y = 0; y < h; y++ )
{
p -= bpl;
ofBmp.write( p, bpl2 );
switch( bpl2 % 4 )
{
case 1:
ofBmp.put( '\0' );
// fallthru
case 2:
ofBmp.put( '\0' );
// fallthru
case 3:
ofBmp.put( '\0' );
// fallthru
}
}
}
ofBmp.close();
return 0;
}
file: /Techref/language/pcl/pickle/bmpio_cpp.htm, 23KB, , updated: 2001/4/5 14:55, local time: 2024/12/26 13:44,
|
| ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://linistepper.com/techref/language/pcl/pickle/bmpio_cpp.htm"> Colorized Source Code</A> |
Did you find what you needed?
|