please dont rip this site

Language Pcl LJ2010.ASC

USING  THE SYMBOL MODE COMMAND

     
     The Symbol Mode ( SM ) command, draws the specified
     symbol at each X, Y coordinate point using the PA , PD
     , PE , PR , and PU commands. The SM command includes an
     automatic pen down; after the symbol is drawn the pen
     position and line attributes are restored. For more
     information see the PCL 5 Printer Language Technical
     Reference Manual. The syntax for this command is as
     follows:
     
     SM character; or SM;
     
     
     LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT.
     
     
     EcE                           Resets the printer.
     
     Ec%0B                         Enters HP-GL/2 mode.
     
     IN;                           Initializes HP-GL/2 mode.
     
     SP1;                          Selects pen number 1,
                                   (black). Even though
                                   there is no physical pen,
                                   the SP command must be
                                   used to enable printing.
     
     SM*;PA200,1000;PD200,
     1230,400,1560;                Enters the symbol mode,
                                   using the asterisk (*) as
                                   the symbol; moves to
                                   absolute location
                                   (200,1000), sets the pen
                                   down, and draws first to
                                   (200,1230), then to
                                   (400,1560). The SM
                                   command will cause an
                                   asterisk to be printed at
                                   each X, Y coordinate of
                                   this command.
          
          NOTE:  To disable the SM command, so it
                 will not print an asterisk at
                 each X, Y coordinate specified,
                 send the command "SM;". By
                 sending this command with no
                 parameters, the symbol mode is
                 terminated.
     
     PD700,1670,1300,1600,
     1800,2000;PU;                 Places the pen down and
                                   draws from the current
                                   pen position (400,1560)
                                   to (700,1670), to
                                   (1300,1600), and to
                                   (1800,2000). The PU then
                                   lifts the pen.
     
     SM3;PA700,500,900,450,
     1300,850;                     Enters the symbol mode
                                   again with a new symbol
                                   of "3" as the current
                                   symbol; prints a "3" at
                                   the following locations:
                                   (700,500), (900,450), and
                                   (1300,850).
     
     PA1750,1300,2500,
     1350;PU;SM;                   With the pen still up and
                                   "3" still the current
                                   symbol, this prints a "3"
                                   at  locations (1750,1300)
                                   and (2500,1350); lifts
                                   the pen, and exits the
                                   symbol mode.
     
     PA3300,1100;PD;SMY;
     PA4400,1890;SMZ;              Moves to (3300,1100),
                                   sets the pen down, and
                                   enters symbol mode with
                                   "Y" as the symbol; draws
                                   a line to (4400,1890),
                                   and prints a "Y"; re-
                                   enters the symbol mode
                                   with the new symbol "Z".
     
     PA4600,1590;SMX;
     PA3300,1100;PU;               Draws a line to
                                   (4600,1590) and prints a
                                   "Z". Specifies "X" as the
                                   next symbol, and moves to
                                   (3300,1100); prints an
                                   "X", and lifts the pen.
     
     SMA;PA4000,400;CI400;         Specifies "A" as the new
                                   symbol and moves to
                                   (4000,400); draws a
                                   circle with a radius of
                                   400 plotter units (plu)
                                   and prints an "A: in the
                                   center.
     
     SM*;PA2600,700;EA1500,200;    Specifies "*" as the new
                                   symbol and moves to
                                   (2600,700); edges a
                                   rectangle with the EA
                                   command, and prints an
                                   asterisk, "*" at the
                                   starting point.
     
     Ec%0A                         Enters PCL mode.
     
     EcE                           Sends a reset to end the
                                   job and eject the page.

            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this
                         material.





file: /Techref/language/pcl/lj2010.asc, 5KB, , updated: 1993/11/15 16:21, local time: 2024/12/25 10:25,
TOP NEW HELP FIND: 
18.118.166.45:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://linistepper.com/techref/language/pcl/lj2010.asc"> language pcl lj2010</A>

Did you find what you needed?