Language Pcl LJ1835.ASC

DRAWING EQUAL-SIZE PICTURES ON A PAGE

     
     For more information see the PCL 5 Printer Language
     Technical Reference Manual.
     
     LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT
     
     
     EcE                           Resets the printer.
     
     Ec&l1O                        Selects landscape
                                   orientation.
     
     Ec%0B                         Enters HP-GL/2 mode,
                                   using the default picture
                                   frame size and anchor
                                   point.
     
     IN;                           Initializes HP-GL/2 mode.
     
     IP500,500,5450,7500;          Sets P1 to (500,500) and
                                   P2 to (5450,7500).
     
     SC0,10,0,15;                  Sets up user-unit scaling
                                   to range from (0,0) to
                                   (10,15).
     
     SP1;                          Selects pen number 1.
                                   Even though there is no
                                   physical pen, the SP
                                   command must be used to
                                   enable printing.
     
     PA0,0;                        Begins absolute plotting
                                   from the origin (0,0).
     
     PD10,0,10,15,0,15,0,0;PU;     Pen Down and print from
                                   (0,0) to (10,0) to
                                   (10,15) to (0,15) to
                                   (0,0); then Pen Up.
     
     IP5550,500;                   Inputs a new P1 and
                                   allows P2 to
                                   automatically follow it.
     
     PA 0,0:                       Begin absolute plotting
                                   from the new origin.
     
     PD10,0,10,15,0,15,0,0;PU;     Pen Down and print from
                                   (0,0) to (10,0) to
                                   (10,15) to (0,15) to
                                   (0,0); then Pen Up.
     
     Ec%0A                         Enters PCL Mode.
     
     EcE                           Resets the Printer to
                                   complete the job and
                                   eject the page.
     
            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this
                         material.