Language Pcl LJ1832.ASC

CREATING A MIRROR-IMAGE

     
     For more information see the PCL5 Printer Language
     Technical Reference Manual.
     
     LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT
     
     
     EcE                           Resets the printer.
     
     Ec%0B                         Enters HP-GL/2 Mode.
     
     IN;                           Initializes HP-GL/2 Mode.
     
     SP1;                          Selects pen number 1. You
                                   must use the SP command
                                   to enable printing.
     
     IP1500,3600,3000,5100;        Specifies the P1/P2
                                   locations for the first
                                   arrow figure.
     
     SC-15,15,-10,10;              Sets up user scaling: (-
                                   15,-10) to (15,10).
     
     (Subroutine)                  Replace (Subroutine) with
                                   the actual subroutine
                                   following this program.
                                   This subroutine will draw
                                   an arrow image on the
                                   page.
     
     IP3000,3600,1500,5100;        Changes the physical
                                   locations of P1 and P2 to
                                   flip the image to the
                                   left.
     
     (Subroutine)                  Prints the second arrow
                                   image.
     
     IP1500,5100,3000,3600;        Changes the physical
                                   locations of P1 and P2 to
                                   flip the image down.
     
     (Subroutine)                  Prints the third arrow
                                   image.
     
     IP3000,5100,1500,3600;        Changes the physical
                                   locations of P1 and P2 to
                                   flip the image to the
                                   left and down.
     
     (Subroutine)                  Prints the fourth arrow
                                   image.
     
     Ec%0A                         Enters the PCL mode.
     
     EcE                           Sends a reset to end the
                                   job and eject the page.
     

SUBROUTINE TO PRINT THE ARROW IMAGE
     
     PA1,2;PD1,4,3,4,3,7,2,7,
     4,9,6,7,5,7,5,4,12,4,12,5,
     14,3,12,1,12,2,1,2;PU;
     
     
            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this
                         material.