please dont rip this site
 
PRODUCT ABSTRACT 


Product Abstract

This page was last updated on January 21, 1998


HM62256B Series

256k SRAM (32-kword X 8-bit)
Rev. 6.0
ADE-203-135F (Z)
PMMSMTD026D1

Contents:

Related Information:

Description/Introduction:

The Hitachi HM62256B Series is a CMOS static RAM organized 32,768-word X 8-bit. It realizes higher performance and low power consumption by employing 0.8 µm Hi-CMOS process technology. The device, packaged in 8 X 14 mm TSOP, 8 X 13.4 mm TSOP with thickness of 1.2 mm, 450 mil SOP (foot print pitch width), 600 mil plastic DIP, or 300 mil plastic DIP, is available for high density mounting. It offers low power standby power dissipation; therefore, it is suitable for battery backup systems.

Features:

  • Single 5.0 V supply: 5.0 V ± 10%
  • Access time: 55 ns/70 ns/85 ns (max)
  • Power dissipation:
    • Active: 25 mW (typ) (f = 1 MHz)
    • Standby: 1.0 µW (typ)
  • Completely static memory
    • No clock or timing strobe required
  • Equal access and cycle times
  • Common data input and output
    • Three state output
  • Directly TTL compatible all inputs and outputs
  • Battery backup operation

file: /Techref/hitachi/hm62256b.htm, 4KB, , updated: 1999/2/20 10:25, local time: 2024/12/25 12:38,
TOP NEW HELP FIND: 
3.145.170.164:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://linistepper.com/techref/hitachi/hm62256b.htm"> HM62256B Series </A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?