Function 2Dh Set Time
Sets current system time
entry AH 2Dh
CH hours (0-23)
CL minutes (0-59)
DH seconds (0-59)
DL hundredths of seconds (0-99)
return AL 00h if no error
0FFh if bad value sent to routine
note 1) DOS 3.3 also sets CMOS clock
2) CX and DX must contain a valid time in binary
file: /Techref/INT/21f/2d.htm, 0KB, , updated: 1999/2/20 10:26, local time: 2024/11/19 11:40,
18.217.209.61:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://linistepper.com/techref/INT/21f/2d.htm"> INT 21f 2d</A> |
Did you find what you needed? |