InsertMenu info Overview Group

The InsertMenu function inserts a new menu item into a menu, moving other items down the menu.

The InsertMenu function has been superseded by the InsertMenuItem function. You can still use InsertMenu, however, if you do not need any of the extended features of InsertMenuItem.

BOOL InsertMenu(

HMENU hMenu,	// handle of menu
UINT uPosition,	// menu item that new menu item precedes
UINT uFlags,	// menu item flags
UINT uIDNewItem,	// menu item identifier or handle of drop-down menu or submenu
LPCTSTR lpNewItem	// menu item content
);

Parameters

hMenu

Identifies the menu to be changed.

uPosition

Specifies the menu item before which the new menu item is to be inserted, as determined by the uFlags parameter.

uFlags

Specifies flags that control the interpretation of the uPosition parameter and the content, appearance, and behavior of the new menu item. This parameter must be a combination of one of the following required values and at least one of the values listed in the following Remarks section.

Value	Description
MF_BYCOMMAND	Indicates that the uPosition parameter gives the identifier of the menu item. The MF_BYCOMMAND flag is the default if neither the MF_BYCOMMAND nor MF_BYPOSITION flag is specified.
MF_BYPOSITION	Indicates that the uPosition parameter gives the zero-based relative position of the new menu item. If uPosition is 0xFFFFFFFF, the new menu item is appended to the end of the menu.

uIDNewItem

Specifies either the identifier of the new menu item or, if the uFlags parameter has the MF_POPUP flag set, the handle of the drop-down menu or submenu.

lpNewItem

Specifies the content of the new menu item. The interpretation of lpNewItem depends on whether the uFlags parameter includes the MF_BITMAP, MF_OWNERDRAW, or MF_STRING flag, as follows:

Value	Description
MF_BITMAP	Contains a bitmap handle.
MF_OWNERDRAW	Contains a 32-bit value supplied by the application that can be used to maintain additional data related to the menu item. The value is in the itemData member of the structure pointed to by the lparam parameter of the WM_MEASUREITEM or WM_DRAWITEM message sent when the menu item is created or its appearance is updated.
MF_STRING	Contains a pointer to a null-terminated string (the default).

Return Values

If the function succeeds, the return value is nonzero.

If the function fails, the return value is zero. To get extended error information, call GetLastError.

Remarks

The application must call the DrawMenuBar function whenever a menu changes, whether or not the menu is in a displayed window.

The following list describes the flags that can be set in the uFlags parameter:

Value	Description
MF_BITMAP	Uses a bitmap as the menu item. The lpNewItem parameter contains the handle of the bitmap.
MF_CHECKED	Places a check mark next to the menu item. If the application provides check mark bitmaps (see SetMenuItemBitmaps), this flag displays the check mark bitmap next to the menu item.
MF_DISABLED	Disables the menu item so that it cannot be selected, but does not gray it.
MF_ENABLED	Enables the menu item so that it can be selected and restores it from its grayed state.
MF_GRAYED	Disables the menu item and grays it so it cannot be selected.
MF_MENUBARBREAK	Functions the same as the MF_MENUBREAK flag for a menu bar. For a drop-down menu, submenu, or shortcut menu, the new column is separated from the old column by a vertical line.
MF_MENUBREAK	Places the item on a new line (for menu bars) or in a new column (for a drop-down menu, submenu, or shortcut menu) without separating columns.
MF_OWNERDRAW	Specifies that the item is an owner-drawn item. Before the menu is displayed for the first time, the window that owns the menu receives a WM_MEASUREITEM message to retrieve the width and height of the menu item. The WM_DRAWITEM message is then sent to the window procedure of the owner window whenever the appearance of the menu item must be updated.
MF_POPUP	Specifies that the menu item opens a drop-down menu or submenu. The uIDNewItem parameter specifies the handle of the drop-down menu or submenu. This flag is used to add a menu name to a menu bar or a menu item that opens a submenu to a drop-down menu, submenu, or shortcut menu.
MF_SEPARATOR	Draws a horizontal dividing line. This flag is used only in a drop-down menu, submenu, or shortcut menu. The line cannot be grayed, disabled, or highlighted. The lpNewItem and uIDNewItem parameters are ignored.
MF_STRING	Specifies that the menu item is a text string; the lpNewItem parameter points to the string.
MF_UNCHECKED	Does not place a check mark next to the menu item (default). If the application supplies check mark bitmaps (see the SetMenuItemBitmaps function), this flag displays the unchecked bitmap next to the menu item.

The following groups of flags cannot be used together:

MF_BYCOMMAND and MF_BYPOSITION
MF_DISABLED, MF_ENABLED, and MF_GRAYED
MF_BITMAP, MF_STRING, MF_OWNERDRAW, and MF_SEPARATOR
MF_MENUBARBREAK and MF_MENUBREAK
MF_CHECKED and MF_UNCHECKED

InsertMenu info Overview Group

Parameters

Return Values

Remarks

See Also