CryptSetKeyParam info Overview Group

The CryptSetKeyParam function lets applications customize various aspects of a key’s operations.

Generally, this function is used to set session-specific parameters on symmetric keys. Note that the base keying material is not accessible by this function.

The Microsoft RSA Base Provider has no settable parameters on key exchange or signature keys. However, custom providers may define parameters that can be set on these keys.

BOOL CRYPTFUNC CryptSetKeyParam(

HCRYPTKEY hKey,
DWORD dwParam,
BYTE *pbData,
DWORD dwFlags
);

Parameters

hKey: [in] A handle to the key on which to set parameters.
dwParam: [in] The parameter number. See the “Remarks” section for a list of valid parameters.
pbData: [in] The parameter data buffer. Place the parameter data in this buffer before calling CryptSetKeyParam. The form of this data will vary, depending on the parameter number.
dwFlags: [in] The flag values. This parameter is reserved for future use and should always be zero.

Remarks

For all session key types, the dwParam value can be set to one of the following key parameter types;

Parameter	Description
KP_SALT	The salt value. The pbData buffer should contain a BYTE array specifying a new salt value. This value is made part of the session key. The size of the salt value will vary depending on the CSP being used so, before setting this parameter, it should be read using CryptGetKeyParam in order to determine its size. When it is suspected that the base data used for derived keys is less than ideal, salt values are often used to make the session keys more unique. This makes dictionary attacks more difficult. When using the Microsoft RSA Base Provider, this parameter defaults to zero.
KP_PERMISSIONS	The key permissions flags. The pbData buffer should contain a DWORD value specifying zero or more permission flags. Refer to the CryptGetKeyParam function for a description of these flags. When using the Microsoft RSA Base Provider, this parameter defaults to 0xFFFFFFFF.

If a block cipher session key is specified by hKey, the dwParam value can also be set to one of the following parameter types.

Parameter	Description
KP_IV	The initialization vector. The pbData buffer should contain a BYTE array specifying the initialization vector. This array should contain <block length>/8 elements. For example, if the block length is 64 bits, the initialization vector will consist of 8 bytes. When using the Microsoft RSA Base Provider, this parameter defaults to zero.
KP_PADDING	The padding mode. The pbData buffer should contain a DWORD value specifying the padding method to be used by the cipher. Following are the padding modes currently defined: PKCS5_PADDING ¾ PKCS 5 (sec 6.2) padding method. When using the Microsoft RSA Base Provider, this parameter defaults to PKCS5_PADDING.
KP_MODE	The cipher mode. The pbData buffer should contain a DWORD value specifying the cipher mode to be used. Refer to the CryptGetKeyParam function for a list of the defined cipher modes. When using the Microsoft RSA Base Provider, this parameter defaults to CRYPT_MODE_CBC.
KP_MODE_BITS	The number of bits to feed back. The pbData buffer contains a DWORD value indicating the number of bits that are processed per cycle when the OFB or CFB cipher modes are used. When using the Microsoft RSA Base Provider, this parameter defaults to 8.

Return Values

If the function succeeds, the return value is nonzero.

If the function fails, the return value is zero. To retrieve extended error information, use the GetLastError function.

The following table lists the error codes most commonly returned by the GetLastError function. The error codes prefaced by “NTE” are generated by the particular CSP you are using.

Error	Description
ERROR_INVALID_HANDLE	One of the parameters specifies an invalid handle.
ERROR_BUSY	The CSP context is currently being used by another process.
ERROR_INVALID_PARAMETER	One of the parameters contains an invalid value. This is most often an illegal pointer.
NTE_BAD_FLAGS	The dwFlags parameter is nonzero or the pbData buffer contains an invalid value.
NTE_BAD_TYPE	The dwParam parameter specifies an unknown parameter.
NTE_BAD_UID	The CSP context that was specified when the hKey key was created cannot be found.
NTE_FAIL	The function failed in some unexpected way.

Example

#include <wincrypt.h>



HCRYPTPROV hProv = 0;

HCRYPTKEY hKey = 0;

DWORD dwMode;

BYTE pbData[16];

DWORD dwCount;

DWORD i;



// Get handle to user default provider.

if(!CryptAcquireContext(&hProv, NULL, NULL, PROV_RSA_FULL, 0)) {

    printf("Error %x during CryptAcquireContext!\n", GetLastError());

    goto done;

}



// Create random block cipher session key.

if(!CryptGenKey(hProv, CALG_RC2, CRYPT_EXPORTABLE, &hKey)) {

    printf("Error %x during CryptGenKey!\n", GetLastError());

    goto done;

}



// Set the cipher mode.

dwMode = CRYPT_MODE_ECB;

if(!CryptSetKeyParam(hKey, KP_MODE, &dwMode, 0)) {

    printf("Error %x during CryptSetKeyParam!\n", GetLastError());

    goto done;

}



// Generate random initialization vector.

if(!CryptGenRandom(hProv, 8, pbData)) {

    printf("Error %x during CryptGenRandom!\n", GetLastError());

    goto done;

}



// Set initialization vector.

if(!CryptSetKeyParam(hKey, KP_IV, pbData, 0)) {

    printf("Error %x during CryptGetKeyParam!\n", GetLastError());

    goto done;

}



// Do something with 'hKey'.

...



done:



// Destroy session key.

if(hKey != 0) CryptDestroyKey(hKey);



// Release provider handle.

if(hProv != 0) CryptReleaseContext(hProv, 0);

CryptSetKeyParam info Overview Group

Parameters

Remarks

Return Values

Example

See Also