The X10 Power Line data transmission protocol

Harrison Coopers collection of X-10 discussions

See also:

http://www.x10.com <- clicking on this link will help support this site!
www.x10.com/firecracker.htm - PC interface
http://www.engr.udayton.edu/faculty/jloomis/ece445/topics/x-10/x10.html (cached 20010604085256 ) X-10 Transmission Theory
220 V. and 50 Hz.
- http://www.laser.com
- http://www.comfort.org.uk
- http://www.ukha.demon.co.uk
http://www.geocities.com/ido_bartana/
http://www.baran-harper.com/tw523.htm
http://ZORINco.com/products/SPI-X10/
http://www.redsword.com/tjacobs/geeb/x10.htm
http://www.hth.com/plm-24/plm-24.htm
http://mlug.missouri.edu/~tymm/ There is Linux software to control the firecracker. There is also much info there about the timing of the device, in case you want to send data to the firecracker serially from some other device.
http://www.mindspring.com/~dr_ed/automa/circuit.htm schematics for appliance, lamp, chime, and wall switch.

file: /Techref/io/serial/x10/index.htm, 2KB, , updated: 2013/7/23 10:50, local time: 2025/4/29 03:27,

^{13.59.144.10:LOG IN}

©2025 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?

Please DO link to this page! Digg it! / MAKE!

<A HREF="http://linistepper.com/Techref/io/serial/x10/index.htm"> The X10 Power Line Data Transmition Protocol</A>

Did you find what you needed?