Interrupt 0Bh Communications Controller (serial port) hdw. entry(0:002Ch) (IRQ3) Serial Port 2 (com2)
note 1) IRQ 3 may be used by SDLC (synchronous data-link control) or
bisynchronous communications cards instead of a serial port.
2) The TOPS and PCnet adapters use this interrupt request line as an
alternate
(internal) not present (80286 protected-mode)
Generated when loading a segment register if the segment descriptor
indicates that the segment is not currently in memory. May be used to
implement virtual memory.
file: /Techref/INT/0B.htm, 0KB, , updated: 1999/2/20 10:27, local time: 2024/12/27 13:16,
52.14.66.242:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://linistepper.com/Techref/INT/0B.htm"> INT 0B</A> |
Did you find what you needed? |